Research article Open Access Logo

History matching for the X−1P well taking into account the characteristics of gas condensate flow in the near-wellbore region

Trường Nguyễn 1, 2
Lân Mai Cao 3, *
  1. Faculty of Geology and Petroleum Engineering – Ho Chi Minh City University of Technology, Vietnam
  2. Vietnam National University – Ho Chi Minh City, Vietnam
  3. Faculty of Geology and Petroleum Engineering, Ho Chi Minh City University of Technology, Viet Nam National University Ho Chi Minh City, Viet Nam
Correspondence to: Lân Mai Cao, Faculty of Geology and Petroleum Engineering, Ho Chi Minh City University of Technology, Viet Nam National University Ho Chi Minh City, Viet Nam. Email: [email protected].

Online metrics


Statistics from the website

  • Abstract Views: 0
  • Galley Views: 0

Statistics from Dimensions

This article is published with open access by Viet Nam National University, Ho Chi Minh City, Viet Nam. This article is distributed under the terms of the Creative Commons Attribution License (CC-BY 4.0) which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited. 

Abstract

This paper presents an improvement in the history matching results of a gas condensate well operating under dew point pressure conditions with significant condensate dropout phenomena. This phenomenon poses challenges for history matching efforts and reliable production forecasting, especially in the context of most gas condensate fields being produced in the pressure depletion stage nowadays. In this study, particular attention is given to the characteristics of the gas condensate flow that describe the condensate dropout phenomenon in the near-wellbore region, thereby enhancing the history matching. The key characteristics of gas condensate flows include Generalized Pseudo-Pressure (GPP), Velocity Dependent Relative Permeability (VDRP), and non−Darcy flow. These three characteristics are of particular importance in the near-wellbore region, and each of them is described in detail to capture the physical behavior of the complex gas condensate flow. The actual production data, such as production rate and bottom-hole pressure, are used as the targets to elucidate the significant impact of considering these three characteristics on the history matching. This work demonstrates the necessity of considering these characteristics to describe the behavior of gas condensate flow, and ultimately shows improved history matching results compared to the conventional approach.

Comments