Vol. 6 No. SI3 (2023): Vol 6 (SI3): ISMSE - International Symposium on Materials Science and Engineering 2023

This special issue is a collection of peer-reviewed articles that were presented at the International Symposium on Materials Science and Engineering 2023, Ho Chi Minh City University of Technology, Viet Nam National University Ho Chi Minh City, Viet Nam.
Website:https://fmt.hcmut.edu.vn/tintuc/thong-bao-to-chuc-hoi-thao-quoc-te-ISMSE-2023
Time: 12 October 2023
Avenue: Building C4, Faculty of Materials Technology, Ho Chi Minh City University of Technology, VNUHCM (268 Ly Thuong Kiet St., Ward 14, Dist. 10, Ho Chi Minh City, Viet Nam)
Chair:

Prof. Huynh Dai Phu ([email protected]), Ho Chi Minh City University of Technology, Viet Nam National University Ho Chi Minh City, Viet Nam.

Dr. Eng. Nguyen Khanh Son ([email protected]), Ho Chi Minh City University of Technology, Viet Nam National University Ho Chi Minh City, Viet Nam.

This special issue:

The lead guest editor: Prof. Huynh Dai Phu ([email protected]), Ho Chi Minh City University of Technology, Viet Nam National University Ho Chi Minh City, Viet Nam.

Guest Editor:

Nguyen Khanh Son ([email protected]), Ho Chi Minh City University of Technology, Viet Nam National University Ho Chi Minh City, Viet Nam
Do Quang Minh (mnh_doquang @hcmut.edu.vn), Ho Chi Minh City University of Technology, Viet Nam National University Ho Chi Minh City, Viet Nam
Tran Van Khai (tvkhai1509 @hcmut.edu.vn), Ho Chi Minh City University of Technology, Viet Nam National University Ho Chi Minh City, Viet Nam
Nguyen Tran Ha (nguyentranha @hcmut.edu.vn), Ho Chi Minh City University of Technology, Viet Nam National University Ho Chi Minh City, Viet Nam

VNUHCM Journal of

Engineering and Technology

Vol. 6 No. SI3 (2023): Vol 6 (SI3): ISMSE - International Symposium on Materials Science and Engineering 2023

Research article

Effects of mixing technique, molar ratio, and filtration methods on the production of titanium power from secondary titanium slag though magnesiothermic reduction

Reuse of human hair waste in the manufacture of composites and assessment of composition effects on mechanical properties

Effect of thermal processing on the synthesis of the phenolic resin from rice husk

Manufacturing Thermal-resistant Aluminum Alloy Wire for Overhead Line Conductor

Enhanced efficiency MnO2-Promoted pt catalyst for VOCs oxidation

Preparation of nanocarbon and metal oxide based composite material for X-band electromagnetic absorption

Optimizing Microwave Synthesis Parameters of Amorphous MoS2/CNT Nanocomposites for Enhanced Hydrogen Evolution using the Taguchi Method

Crosslinked hydrogel based on Polyvinyl alcohol/chitosan/glyoxal for the removal of Crom(VI) ions from aqueous solution

Study on the fabrication and investigation of the structural, optical and photocatalytic properties of Co2+, Ni2+ co-doped ZnO nanomaterials

Fabrication and study on the structural and photocatalytic characterization of Ag doped ZnO nanostructure materials